Turck Magnet Inductive Proximity Sensor BIM-INT-RP6X, P/N 4623514

Description

YOU ARE BUYING ONE SENSOR FOR THE MONEY
We got these from the storage room at a very technically elaborate and well maintained candle factory. They were part of some aluminum “tinker-toy” contraption that had been put into storage. The leads are all equipped with the European style crimp on wire ends and show no evidence of ever being crunched in a wire terminal.
They have ALL been tested at 12 VDC using my neodymium bench magnet which operates the switch at about 2 cm.
They are 5 x 6 x 31 mm and are made to fit in a channel on the side of an air cylinder (or an aluminum tinker toy). There is a tiny LEFT HANDED M2.5 screw and clamp that secures it in the channel. You turn it to the right to tighten it and
¼ turn
to the left to release the clamp (just so you know). The cords are 2 M long.
The specifications are impressive (10 M/sec pass speed), reverse polarity and overload protection. Supply is 10-30 VDC, PNP operation.
These are NORMALLY CLOSED – presence of the magnet causes the local LED and output to be OFF.
These come in a plastic sandwich bag. If you want a bag with the Turck logo on it add and go to a distributor.
12 oz. shipping USPS
QZ1505 07