Tone Geek VS10 Valve Screamer - Handwired Ibanez TS10 Clone

Description

Accurate Ibanez TS10 clone hand wired with through hole parts, socketed JRC4558 op amp, NOS Toshiba 1S1588 clipping diodes, NOS Toshiba JFET 2SK118 transistors, and silver-plated Teflon (PTFE) hook up wire.
Get your Mayer tones for way less than the original.
The Tone Geek TS10 - Demo
Video will open in a new window
Using the mobile app? Copy this link into your browser:
From the Tone Geek website:
My goal with this pedal is:
Make it an honest TS10 circuit and add in switchable clipping and bass options.
Carefully chosen components that influence the tonal "signature" of the pedal per the original.
Select highly reliable mechanical components such as jacks, switches, pots, and footswitches.
Keep the buffer and flip-flop circuit per the original.
Utilize the same component type in the signal flow (transistors, capacitors).
The result:
1S1588 clipping diode mode just like the original.
LED high headroom clipping mode for fast response and low gain.
Keeley BD-2 style clipping mode for asymmetrical clipping for a tube-like response.
3 bass selection modes for stock, bass+, and bass++.
2SC1815 and 2SK118 transistors per the original as another tonal "signature" influence.
Non-polarized 1uf electrolytic capacitors per the original.
Mylar film capacitors in the signal chain per the original.
High-quality Alpha pots and stomp switch that you can feel click under your foot.
1/4" and power jacks were carefully selected so they hold the plugs in place. This is really important to me when I'm observing pedal "quality".
Standard Hammond 125B size with top jacks.
Combining all these elements together resulted in a pedal that was scientifically proven to match a real TS10 on my scope as well as creating the highest quality and reliable look and feel when interacting with this pedal.