Stone Deaf FX Noise Reaper noise gate

Description

Maker:
Stone Deaf FX
Model:
Noise reaper
Condition:
New
Description:
The ”Noise Reaper” is a professional noise gate designed for line level instruments, guitar and bass that has evolved from our noise gate technology within our “Warp Drive and Fig Fumb” high gain distortion and fuzz pedals. Tried and tested for many years in these applications with added improvements controlling unwieldy feedback and signal sources, be sure that this is one of the best noise gates on the market.
​
The pedal consists of a “Threshold” control knob which enables you to control how much the gate opens allowing for the dynamics you want to shine through.
The pedal works by taking the input sensitivity of the guitar input and the noisy signal source and comparing the two which enables you to gate unwanted noise but still be able to sustain notes if playing lead guitar sections. The LED indicates if the noise gate is on or off and it has a high-quality soft touch relay based true bypass footswitch / circuit.
​
The pedal uses a high quality VCA which is the THAT Corporation 2181C for this application giving transparent ultra-low distortion and high dynamic range to keep your tone sounding absolutely fantastic.
The “Noise Reaper” can operate in “Pedal” mode and “Series FX Loop” mode. You can use two Noise Reapers for absolute silence should you need to as a 3rd mode.
.
Must be used with an Isolated power supply to stop ground loops!!!
THD: 0.03%
Dynamic Range: 120dB
Output Noise: 0% or -98dB
​
DIMENSIONS:
Width: 6.5cm
Length: 11cm
Depth: 4.5cm
Noise Gate
Professional noise gate to be used with guitar and bass and some line level instruments. Silence the noise from noisy pedal chains or hissy amplifiers enabling you to clean up your tone and modulation repeats. Applicable to all styles of music.
How does it work?
The pedal works by taking the input sensitivity of the guitar input and the noisy signal source and comparing the two which enables you to gate unwanted noise but still be able to sustain notes if playing lead guitar sections. The LED indicates if the noise gate is on or off and it has a high-quality soft touch relay based true bypass footswitch / circuit.
When using
Noise gates are usually associated with high gain genre's of music but we have given you an ultra smooth gate that will work well with any genre allowing you to cut noise, sustain notes with pristine tone that is retained. Allowing you to get the most out of your guitar pedal chain, cleaning up modulation repeats and stopping unwanted feedback.
Spec
Unlike our competitors we don't choke your tone when chugging or palm muting and you also don't have to buy a Y splitter for it to work as it already has an in-built loop.
-
The “Noise Reaper” can operate in “Pedal” mode and “Series FX Loop” mode. You can use two Noise Reapers for absolute silence should you need to as a 3rd mode.
-
Must be used with an Isolated power supply to stop ground loops!!!
THD: 0.03%
Dynamic Range: 120dB
Output Noise: 0% or -98dB