Scale Load Cell Weight Weighing Sensor HX711 AD Module Metal Shied 2//5/10/20KG

Description

Store category
Sign Up Now !
You may also like
Scale Load Cell Weight Weighing Sensor HX711 AD Module Metal Shied 2//5/10/20KG
Product Description
Note: This is an optional listing. Pls select the correct item you want .
UNO Board is not included. Just for reference only.
HX711 Weighing Weight Sensor Electronic Scale AD Module Dual-channel 24-bit A/D Conversion Metal Shied Beus Load Cell Anti-Jamming
Chip: HX711
Onboard 2Pcs 47 uF bile capacitance
Reserved CPU welding position ，not include the CPU
Two kinds of pin
Operation supply voltage range: 2.6-5.5V
Typical current : 1.7 mA
Size:29mm*17mm*4mm
Operation temperature range: -40 ~ +85℃
Two selectable differential input channels
On-chip active low noise PGA with selectable gain of 64 and 128
On-chip power supply regulator for load-cell and ADC analog power supply
On-chip oscillator requiring no external component with optional external crystal
On-chip power-on-reset
Simple digital control and serial interface: pin-driven controls, no programming needed
Selectable 10SPS or 80SPS output data rate
Simultaneous 50 and 60Hz supply rejection
1/2/3/5/10/20KG Scale Load Cell Weight Weighing Sensor
Four leads, easy to use,
5-10V drive voltage applied, the force is directly output as a voltage change signal.
Dimensions: 12.7mm * 12.7mm * 80mm
Sensor through the screw hole at one end fixed and the other end to keep floating state, applying gravity following the direction indicated by label
Particular attention must not directly push the white plastic cover part, so as not to damage the sensor
Connection:
Red wire to E+
Black wire to E-,
Green wire to A+
White wire to A-
Payment
Shipping
Delivery time
Return Policy
Contact us
Payment
1.We accept Paypal payment only , you can use credit card through PayPal.
2.Please make payment asap,then we can arrange shipment for you asap.
Shipping
If total amount ≥ 7usd ,we provide a tracking number with
you.
Delivery time
Normally it arrive in 10-30 business days when your order amount is more than 7usd.
And 30-60 days when amount is less than 7usd.
Return Policy
1.All products are eligible for 30-days money back guarantee.
2.All returns should be guided by us, please contact us for detail before you return anything.
Contact us
We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Two selectable differential input channels On-chip active low noise PGA with selectable gain of 64 and 128 On-chip power supply regulator for load-cell and ADC analog power supply On-chip oscillator requiring no external component with optional external crystal On-chip power-on-reset Simple digital control and serial interface: pin-driven controls, no programming needed Selectable 10SPS or 80SPS output data rate Simultaneous 50 and 60Hz supply rejection 1/2/3/5/10/20KG Scale Load Cell Weight Weighing Sensor Four leads, easy to use, 5-10V drive voltage applied, the force is directly output as a voltage change signal. Dimensions: 12.7mm * 12.7mm * 80mm Sensor through the screw hole at one end fixed and the other end to keep floating state, applying gravity following the direction indicated