Rockett Pedals Steampunk Booster Buffer + Free Analog Flanger Pedal

Description

Message us to have your questions answered!
Rockett Pedals Steampunk Booster Buffer
JET SERIES
This highly versatile yet simple pedal is a perfect 2 in 1 Buffer Booster. The buffer is perfect for fixing any impedance issues created from using long cables and big boards. The buffer will allow you to save your tone and regain any high end loss that may occur. The good news, it is fully selectable so if you don’t want it there is an internal slide switch and an LED indicator to let you know of it is in or out of the circuit. It can also be used whether the boost is engaged or not.
The boost feature provides a clean 20+ Db push to your amps and effects. Whether you need your solo to have more Umph, want to drive your amp that last little bit towards total crunch or push your other overdrives into high gain mode the Steampunk is your pedal. The side benefit to the steampunk is that it can take perfectly clean tones and add a magical sustain and clarity....this is no Rangemaster by any stretch but rather a chime machine that keeps your EQ spectrum in tact!
This Rockett Pedals Steampunk Booster Buffer comes with a free
JRR Pedals BBD Analog Flanger Pedal
. The BBD Flange uses a genuine analog Bucket Brigade Delay chip to create its flanging, chorus, rotary, and ring mod effects, the same chip used in vintage analog chorus pedals such as the Ibanez FL9 that it is based on.
The BBD Flange provides a wide array of time modulation effects thanks to its Manual knob, which sets the center delay time. All the way up, it is a rich, jet-like flanger. In the middle, it is a lush chorus. All the way down, it is a modulation delay. Ring mod effects can be accomplished by turning the Rate knob all the way up, modulating your sound with an audio frequency oscillator. The Width knob sets the size of the oscillation, from a slight quiver to a synth-like vibrato. The Regen knob sets the delay feedback to intensify the effect. The Regen knob can also be made to self oscillate when turned all the way up, an effect only found authentically in true analog flanger pedals.
The BBD Flange features true bypass switching. It does NOT run on batteries and must be used with a standard 9V power supply. Any 9V power supply made for pedals will work.
Get more information about this product, our shipping charges & JRR Shop
JRR Shop accepts returns for exchange or money back.  There is no restocking fee on exchanges but there is a 15% restocking fee on money back.  If you receive a defective unit, we will send you a new replacement for it with no restocking fee.
JRR Shop adds a signature requirement to all orders over 0 in value. Please message us immediately if you wish to remove the signature requirement from your order.
Please note, that once the order has been shipped we cannot remove the signature requirement.
JET SERIES
This highly versatile yet simple pedal is a perfect 2 in 1 Buffer Booster. The buffer is perfect for fixing any impedance issues created from using long cables and big boards. The buffer will allow you to save your tone and regain any high end loss that may occur. The good news, it is fully selectable so if you don’t want it there is an internal slide switch and an LED indicator to let you know of it is in or out of the circuit. It can also be used whether the boost is engaged or not.
The boost feature provides a clean 20+ Db push to your amps and effects. Whether you need your solo to have more Umph, want to drive your amp that last little bit towards total crunch or push your other overdrives into high gain mode the Steampunk is your pedal. The side benefit to the steampunk is that it can take perfectly clean tones and add a magical sustain and clarity....this is no Rangemaster by any stretch but rather a chime machine that keeps your EQ spectrum in tact!
Be sure to add JRR Shop to your
favorites list
& check out our
other items
!