DC18V-60V to 12V Buck converter Passive PoE Splitter Cable Power Over Ethernet

Description

DC Buck Passive PoE Splitter Cable
DC18-60V to 12V 1.2A
with Waterproof accessory
This is a Passive PoE splitter with DC Buck to power non-PoE enabled devices
.  usage please refer to the following photos:
It accepts a wide range of DC input from 18v to 60v via Passive PoE (not 802.3af/at PoE) to output fixed 12v/2A via the DC Jack (5.5 x 2.1mm) and 10/100 RJ45 Jack.
This way a non PoE enabled device can be powered remotely via any Passive PoE Injector or Passive PoE Switch.
Notice:
1. it is only compatible with Passive POE switch/Injector which use Mode B(RJ45 Power PIN:4/5+ & 7/8-), it is not compatible with POE Mode A (RJ45 Power PIN:1/2+ & 3/6-).
2.
The DC Buck passive PoE Splitter. with following function:
1,Transfer the data signal input from RJ45 socket 1236pins via the other side RJ45 connector to the IP camera.
2,Transfering the DC18-60V power input from RJ45 socket 4578pins(45+, 78-) which the voltage will be lowered to 12V,then through the other side DC port(5.5 x 2.1 mm) into the IP camera.
Input / Output Specifications :
DC Input Voltage Max
60V DC
DC Input Voltage Min
18V DC
DC Output Voltage
12V DC
Max Output Current
1.2A Max.
Power Output
DC Jack
5.5mm x 2.1mm
RJ45 Data PIN: 1/2 & 3/6
RJ45 Power PIN:  4/5+ & 7/8-
Ethernet Data rate 10/100 Mbp
Ethernet Cable TIA/EIA 568 Cat.5
Ethernet Cable Connector RJ-45
Input
Pins
RJ45 Plug
Output
Pins
RJ45 Jack
1
Tx(+)
Tx(+)
1
2
Tx (-)
Tx (-)
2
3
Rx (+)
Rx (+)
3
4
V+
N.C.
4
5
V+
N.C.
5
6
Rx (-)
Rx (-)
6
7
GND
N.C.
7
8
GND
N.C.
8
General Specifications:
Operating Temperature
-10oC ~ +60oC
Storage Temperature
-20oC ~ +70oC
Humidity
Up to 90%
Weight
58
g
Length: 240mm total length (including connectors),High-quality oxygen-free copper Cable
Item Included:
DC18-60V to 12V DC Buck Passive PoE Splitter Cable x1
Waterproof accessory x1set