1 Pair Black & Red High Quality Solar Panel Extension  Wire & Connectors 10 AWG

Description

1 Pair Black & Red High Quality Solar Panel Extension  Wire & Connectors 10 AWG
*US Seller and fast shipping
*
100% New, High quality
*
Insulation Jacket
,
Chemically crosslinked polyethylene, Sunlight resistant
*
Anti-ultraviolet, flame retardant, high temperature resistance, low resistance, conductive stability
*
Resistant to pressure, folding and flexibility
What is included:
One piece black solar cable + one piece red cable solar cable terminated with Solar Connectors.
Application
600 Volt power cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit conditions. For uses in Class I, II, and III, Division 2 hazardous locations per NEC Article 501 and 502.
Specifications
SIZE (AWG OR KCMIL)
10 AWG
NO. OF STRANDS
19
INSULATION THICKNESS
(MILS)
75
mils
NOM. OD
(MILS)
263
mils
NOMINAL TOTAL WEIGHT
(LBS/1000')
53
lbs/1000'
Standards & References
ASTM B3 Standard Specification for Soft or Annealed Copper Wire
ASTM B8 Concentric-Lay-Stranded Copper Conductors
UL 44 Thermoset-Insulated Wires and Cables
UL 1685 FT4 Vertical-Tray Fire Propagation and Smoke Release Test
ICEA S-58-679 Control Cable Conductor Identification Method 4
ICEA S-95-658 (NEMA WC70) Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test
Construction
Conductor:Class B compressed stranded bare copper per ASTM B3 and ASTM B8
Insulation:Cross Linked Polyethylene (XLPE) Type XHHW-2
Overall Jacket:Polyvinyl Chloride (PVC) Jacket